|




|
|
|
 |
INTRODUCTION
Prefabricated Tubular Steel Structures: The
Tubular Section Has More Torsional Resistance
Than Other Sections Including The Solid Round
One. These Tubular Sheds Are Entirely
Prefabricated And Can Be Transported To Site In
Knock Down Condition. No Welding Is Required At
Site.
These Are Following Advantages Of Pre –fabricated Tubular
Sheds:
1) These Are Pre-fabricated Sheds And Have 100%
Salvage Value At Any Time.
2) It Can Be Relocated To Other Location.
3) No Welding At Site Is Required. It Is Very
Safe For Industries Were Welding Inside
Plant Is Restricted.
4) The Construction Time Is Very Less In
Comparison To Civil Work.
5) These Sheds Are Designed As Per ISI Standard
.
6) The Tubular Sections Have More Torsional
Resistance Than Other Sections Of The
Equal Weights. The Tube Sections Have Higher Frequency
Vibrations
Under Dynamic Loading Than Other Sections Including The Solid Round One.
The Round Tubular
Sections Offer Less Resistance To Wind.
7) The Round Tubular Sections Have As Much As 30
To 40 % Less Area That Of
Equivalent Rolled Steel Shape. therefore The Cost Of
Maintenance, Cost
Of Painting, Fire-proofing Or Other Protective Coatings Reduce
Considerably.
The Possibility Of Corrosion Also Reduces. The Ends Of Tubes
Are Sealed. As
Result Of This The Interior Surface Is Not Subjected To
Corrosion.
The Use Of Round Tubular Members Is Becoming More Generally
Adopted
For Structures.
8) Tubes Are Of Special Interest To The
Architects From An Effective Viewpoint And
To The Engineers From Structural Effectiveness Viewpoint.
Application:
Factory Sheds, Godown, Vehicle Stand, Community
Halls, Poultry Sheds, Canopy Etc.
Meterial Specification
Our Pre- Fabricated Steel Structures Are Made Of
Medium M.S. Pipes We Design As Per Required
Length, Span And Height Depending On The
Customer Requirement.
we Consider All Relevant
Factors For Designing The Steel Structures As
Per Is Standard 1161 And 1239
|
ITEM |
SPECIFICATION |
1) ROUND HOLLOW
SECTIONS (PIPES)
2) CAPPING OF PIPES
3) STRUCTURAL STEEL
4) WELDING
|
M.S. BLACK ERW PIPES WILL BE USED AS PER
IS 1239-1969 AND IS 1161-1979.
ALL PIPES WILL BE SEALED TO AVOID
MOISTURE
STRUCTURAL STEEL LIKE ANGLE, CHANNEL,
AND BEAM WILL BE OF PRIME QUALITY
MATERIAL FROM TISCO, SAIL, ETC.
THE WELDING WILL BE IN ACCORDANCE WITH
IS 9595.
|
|
|